T-ATCA 404

40GE AdvancedTCA® Switch Fabric

T-ATCA 404
T-ATCA 404 uniquely delivers an extensive networking software suite, BiNOX™, to provide complete networking solution for ATCA platforms.

Download the Datasheet


AdvancedTCA specifications enable rapid development of mission-critical telecom applications such as LTE, IPTV, media gateway, metro Ethernet, security, DPI and military operations. 

These require a cost-effective, high performance, high bandwidth and high availability solution, which can be achieved using ATCA standard architecture. Central to this architecture is the ATCA switch that provides connectivity between ATCA chassis node switches and external networks.

Telco Systems’ T-ATCA 404 delivers unparalleled connectivity to ATCA platforms with support for 10/40Gbps multirate switching on the fabric interface (FI) and 1/10Gbps multirate switching on the base interface (BI). The T-ATCA 404 can provide up to 14x40GE fabric backplane interfaces and 8x10GE front panel interfaces, plus the option of 2x40GE front panel interfaces or 8x10GE ports for ingress traffic. Each FI port can be configured to multirate speeds of 10Gbps or 40Gbps to support simultaneous 10GE and 40GE ATCA service modules.

T-ATCA 404 uniquely delivers an extensive networking software suite, BiNOX™, to provide a complete networking solution for ATCA platforms. BiNOX™ is Telco Systems’ field-proven, carrier-grade networking operating system offering superior control and security while delivering wire speed Layer 2-4 networking. BiNOX helps to eliminate oversubscription and traffic congestion and supports low latency requirements which are mandatory in carrier-grade and cloud networks.
BiNOX™ networking software delivers state of the art connectivity, including switching, IPv4/IPv6 routing, load balancing, MPLS, QoS, protection and redundancy, and clock synchronization. 

Telco Systems’ BiNOX-powered T-ATCA product line delivers ready-to-deploy networking devices that allow much faster integration, interoperability with tier 1 network devices, and a more robust solution. Devices powered by BiNOX™ are widely deployed in critical carrier and enterprise networks worldwide.
  • 4K VLAN address support
  • 128 trunk group support
  • 9MB integrated packet buffer memory
  • Binary database advantages
  • Fast Ethernet update channel between hub switches
  • Full MPLS/VPLS/VPWS implementation
  • OEM and private label options
  • Flexible management options via SSH, Telnet, Console, SNMPv3, NETCONF (including Juniper, Cisco, ALU like CLI), Syslog
  • PICMG 3.0 / 3.1 compliant
  • Supports up to 16-slot platforms 
  • 1GE/10GE base interface with 4 uplinks
  • 10GE/40GE fabric interface (40GBaseKR4, 4 x10GBaseKR, 10GBaseKX4) 
  • 8x10GE and 2x40GE (or additional 8x10GE) uplinks 
  • More than 160Gbps external connectivity, and a total of 640Gbps 
  • Wire speed non-blocking L2-4 switching 
  • IPv4 and IPv6 switching on both BI & FI 
  • 128K Mac address support 
  • 16K IPv4 / 8K IPv6 LPM 
  • Advanced load balancing on L2-L4 
  • Unique Hierarchal QoS (HQoS)* for service assurance 
  • Advanced security mechanisms 
  • Enhanced protection and resiliency options 
  • Enhanced clock synchronization (IEEE1588v2*, SynchE*) 
  • Proven interoperability with ATCA chassis, CPU blades and shelf management 
  • NEBS and ETSI compliant
Fabric Interface (FI)
  • Wire speed, 40GE ATCA switch
  • 8 x SFP+(1/10GE) 
  • 2 x QSFP or 8 x SFP+ 
  • 640Gbps full duplex switch capacity
  • Backplane: 16 x 40GE (40GBaseKR4, 4x10GbaseKR,10GBaseKX4)
Base Interface (BI)
  • 4 x SFP+ (2 x10GE+2 x1GE)
  • Backplane: 14 x GE (1000BaseT)
  • 2 x 100BaseT shelf manager controller (ShMC)
Timing
  • SyncE*, IEEE 1588v2 PTP*, BITS* and phase clock
Services
  • All MEF services, IEEE 802.1Q bridging (VLAN), IEEE 802.1ad Q-in-Q (TLS), one IP per chassis, VRRP, OSPF, IS-IS, OAM - IEEE 802.3ah EFM
  • MPLS L2VPN - full VPLS PE, MTU HVPLS, VPWS, MPLS L3VPN*, MPLS-TP*
Resiliency
  • Sub-50ms RSVP-TE FRR, HVPLS dual homing, secondary LSP
  • xSTP, resilient link, 
  • LAG (Static/IEEE 802.3ad LACP/Multi-chassis*)
Quality of Service
  • Per port/EVC/flow single/dual rate limiting
  • Hierarchical rate limit per port/EVC/flow 
  • SP, WRR and hybrid frames scheduling, CoS marking and mapping per EVC, flow control
Multicast Management
  • IGMP snooping v1/v2/v3
Load balancing
  • Advanced load balancing capabilities with dynamic “bucket” management updates 
Redundancy
  • Hitless switch over mechanism under switch/link fail, dual chassis LAG*, N+M payload blade control
Management
  • Console, Telnet, SSHv2, Radius, TACACS+, SNMP v1/2/3, xFTP, NTP, DNS resolver
Security
  • ACLs, RADIUS, SSHv2, SNMPv3, SFTP, port security, broadcast storm prevention, secured access
EMC and Immunity
  • FCC 47 CFR, Part 15 Subpart B (2009 Class A)
  • ICES-003 (2004) / CISPR 22: 2008 / ANSI C63.4:2009
  • EN 55022:2006 + A1:2007 + A2:2010, Class A
  • EN 55024:2010
  • IEC 61000-4-2:2008
  • IEC 61000-4-3:2006 + A1:2007 + A2:2010
  • IEC 61000-4-4:2004 + A1:2010
  • IEC 61000-4-5:2005
  • IEC 61000-4-6:2008
  • IEC 61000-4-8:2009
Safety
  • UL 60950-1:2007, 2nd Edition
  • CSA C22.2 No. 60950-1-07, 2nd Edition

Data Sheets

T-ATCA404 Data sheet
Last Updated: 2014-09-29

Related Files

Carrier Ethernet Products Matrix
Last Updated: 2015-04-20